• Samples and development
  • Global buyers · suppliers in mainland China

Packaging Specification Checklist for Supplier Discussions

Short answer

Describe what the packaging must do, what goes inside each level and how you will check the proposed configuration. Shop8 recommends recording protection needs, pack quantities, dimensions, artwork and agreed tests in one revision. Leave product-specific, destination-market and transport requirements for the appropriate specialist to confirm.

Where this applies: For business buyers in any destination market working with suppliers in mainland China. This is an operational planning framework; product-specific technical and market requirements need separate review.

Checklists and examples are Shop8 editorial recommendations. Reviewed by a separate AI agent in a separate context; the same model family was used. No human editorial review has been completed.

In this guide
  1. Describe the job of the packaging
  2. Map each packaging level
  3. Write the configuration and artwork fields
  4. Agree checks before calling the pack accepted
  5. Worked example: specify separation, not an adjective
  6. Packaging checklist limits and next action
  7. Sources

Describe the job of the packaging

Use this checklist when requesting packaging for samples or a quantity order. Start with the use: a retail presentation box, a reusable storage container, an inner divider or an outer shipping carton. Explain what the buyer needs the pack to protect, display or help handlers identify.

Write observable requirements instead of “strong export packaging.” For example, ask that parts remain separated in the agreed pack configuration and that the product can be removed without the specified finish contacting an exposed fastener. These are possible buyer requirements, not universal criteria. Have the supplier propose a configuration and describe how it meets each need.

Map each packaging level

Shop8 recommends a simple pack map. Give each level an identifier so quotation, artwork and sample discussions refer to the same object.

LevelRecordClarify
Product packContents, orientation, separators and closureWhat may touch the product?
Inner packNumber of product packs and arrangementCan it be handled separately?
Outer packInner-pack count, proposed dimensions and weightWho confirms the final measured values?

Attach a sketch or annotated photograph where orientation matters. State the measurement unit and whether a dimension describes the inside space, outside size or a limit. Avoid asking the supplier to infer that distinction.

Write the configuration and artwork fields

  • Product and packaging codes, document revision and owner.
  • Supplier-proposed materials, thicknesses or grades where relevant to the agreed design.
  • Quantity at every level and included accessories or instructions.
  • Artwork file name, revision, print location and approved text.
  • Label content and the person responsible for approving it.
  • Closure, opening direction and any repacking expectations.
  • Known storage and handling conditions that the design should address.

Mark proposed values separately from approved values. If a logistics provider or technical specialist must supply a requirement, record the question and owner instead of inventing a number.

Agree checks before calling the pack accepted

Specify the configuration to be checked, the method, the required result and the evidence to return. Possible questions include whether the agreed count fits, whether the parts remain separated after a defined handling exercise and whether artwork is legible in the agreed position. Have a competent person define any technical transport or performance test needed for the product.

Record whether the check was performed on a packaging-only mock-up or on the complete product and packaging. If the result depends on the combined configuration, ask for evidence from that configuration. Do not convert an informal handling demonstration into a claim of compliance with an unnamed standard.

Worked example: specify separation, not an adjective

In a hypothetical purchase of coated metal desk trays, the buyer's first brief says “good protective packaging.” The revised brief asks the supplier to propose a divider arrangement that separates the specified coated faces, identify the number of trays in each outer carton and provide photographs showing the packing sequence.

The buyer then agrees a handling check with the supplier and records the required result and evidence. The example contains no recommended material grade or test severity. Its purpose is to turn a vague request into questions the two parties can review, quote and demonstrate.

Packaging checklist limits and next action

This checklist organizes a packaging discussion. It does not determine destination labelling rules, transport suitability or product safety requirements. Resolve those separately with the relevant technical and logistics advisers. If the proposed pack changes the count, dimensions, product-contact surfaces or artwork, review the affected requirements again rather than approving only the new photograph.

Next, send one revision of the pack map, configuration and artwork list. Ask for the supplier's marked response, open questions and a representative packed sample or other agreed evidence. Keep the final packaging approval linked to the same product revision.

Sources and editorial method

This guide presents an original Shop8 planning method and illustrative examples. It does not assert externally mandated criteria. The steps are editorial recommendations; they are not attributed to an outside institution.

Update history

23 October 2026: first draft prepared. 23 October 2026: first publication. Review sooner if a cited source or the buying requirements change.