• AI-assisted procurement
  • Global buyers · suppliers in mainland China

AI RFQ Draft Checklist: Use Approved Facts and Check Every Requirement

Short answer

Give AI an approved fact sheet and ask it to organize those facts into an RFQ draft. Require missing details to appear as questions and require each requirement to retain its input reference. Shop8 recommends checking the draft line by line before sending it to a supplier; fluent wording is not evidence that a requirement is correct.

Where this applies: For business buyers in any destination market working with suppliers in mainland China. This is an operational workflow; specialist technical, compliance, financial and legal decisions require separate review.

Checklists and examples are Shop8 editorial recommendations. Reviewed by a separate AI agent in a separate context; the same model family was used. No human editorial review has been completed.

In this guide
  1. Prepare facts before asking for prose
  2. Choose what the tool may receive
  3. Use a constrained drafting prompt
  4. Validate the draft in two passes
  5. Worked example: preserve an unknown material
  6. Draft limitations and what to send next
  7. Sources

Prepare facts before asking for prose

Use this workflow when your team already knows the product and needs help organizing a clear supplier enquiry. Prepare a numbered fact sheet with product description, drawing revisions, quantities, intended use, destination, requested timing and questions for the supplier. Mark each field approved, provisional or unknown.

NIST describes confabulation as confidently presented erroneous or false content. This is a reason to validate an AI draft against your inputs rather than judging it by tone. Source: NIST AI 600-1, section 2.2. The practical checklist here is Shop8's original workflow.

Choose what the tool may receive

Follow your organization's approved-tool and information-sharing rules. Decide whether the task can be completed with product codes and non-sensitive descriptions. Remove unnecessary personal details, bank information, confidential drawings and unrelated supplier correspondence before preparing the input.

Do not assume that a tool is approved for a document simply because someone can upload it. If sharing permissions are unclear, resolve them with the responsible person or use a manually prepared input that fits the permitted scope. This guide makes no claim about any product's retention, security settings or contractual terms.

Use a constrained drafting prompt

Shop8 suggests the following prompt, followed by your numbered fact sheet:

Prompt: “Create a supplier RFQ draft using only the facts below. Keep approved requirements unchanged in meaning, including numbers, units, quantities, revisions and dates. Label provisional items as provisional. Do not add materials, tolerances, standards, certifications, trade terms or delivery promises. Put every missing detail in a buyer questions list. Return: a short email, a structured requirements table, questions for the supplier, and a mapping from each drafted requirement to its input ID. If inputs conflict, list the conflict and leave the affected requirement unresolved.”

Ask for a draft, not a supplier-readiness score. The mapping gives you a practical way to inspect what the tool retained, omitted or introduced.

Validate the draft in two passes

  1. Compare every input ID with the draft. Check for omissions and changed meanings.
  2. Check every drafted requirement has an input reference. Remove unsupported additions or obtain explicit buyer approval.
  3. Read all numbers, units, quantities, revision labels and dates against the original fact sheet.
  4. Check provisional and unknown items remain visibly unresolved.
  5. Review the supplier questions for assumptions disguised as requirements.
  6. Read the final email as the recipient: is the requested response clear?

Use the fact sheet as the reference even if the draft sounds more polished. Ask the product owner to resolve technical ambiguity; asking AI to choose a plausible value does not close the buyer's decision.

Worked example: preserve an unknown material

A hypothetical buyer's approved input says “desktop organizer, 800 units, dimensions per drawing R2; material not yet selected; supplier to propose alternatives.” A weak draft might turn that into a specific plastic and present it as fixed. The buyer rejects that addition.

The checked draft requests supplier-proposed material options, identifies the drawing revision and asks the supplier to explain implications for the quotation and sample plan. The buyer still owns the material decision. This example illustrates a validation step; it does not recommend a material or claim that any particular tool will make this error.

Draft limitations and what to send next

Keep the input fact sheet, AI draft and reviewed RFQ as separate versions. Record who resolved the open questions and which requirements changed during review. Send only the version that the buyer has checked and authorized for supplier use.

Next, ask the supplier to respond against the requirement table, identify deviations and list assumptions rather than replying with a price alone. If the product brief is still too uncertain for a meaningful quotation, use the draft to gather clarification first. AI can assist this writing task; the workflow does not verify supplier capability or product suitability.

Sources and editorial method

Sources support the attributed facts below. The worksheets, examples and decision steps are Shop8 recommendations, rather than requirements issued by these organisations.

  1. [1]
    Artificial Intelligence Risk Management Framework: Generative Artificial Intelligence Profile (NIST AI 600-1) — National Institute of Standards and Technology (NIST). Checked 23 October 2026.

Update history

23 October 2026: first draft prepared. 23 October 2026: first publication. Review sooner if a cited source or the buying requirements change.